IED FOUND/CLEARED Other

(S//REL GCTF) ONE END OF THE PIPE CONTAINS A SOLID CAP, HOWEVER THE OTHER END CONTAINS A CAP WITH SIX HOLES THAT APPEAR TO BE VENTURIS. FIVE HOLES ARE OPEN, AND THE SIXTH HOLE HAD CAULKING WHICH THE WIRES RAN THRU. THERE WERE TWO PLASTIC CONNECTORS (MALE AND FEMALE ENDS) THAT WERE CONNECTED TOGETHER ON THE OUTSIDE OF THE PIPE. THE MALE END HAD A SINGLE WIRE ABOUT 1 LONG INSERTED INTO BOTH HOLES AND POSSIBLE USED AS A SHUNT. THE FEMALE CONNECTOR HAD WIRES THAT WENT INTO THE PIPE, AND RAN THE ENTIRE LENGTH OF THE PIPE, WHERE THEY WERE CONNECTED TO AN INITIATOR. THE INITIATOR WAS HOUSED INSIDE A PLASTIC CASE, THAT WAS THEN WRAPPED IN ALUMINUM FOIL. THIS WAS LOCATED AT THE END OF THE PIPE WITH THE SOLID CAP. THE FILLER FOR THIS DEVICE WAS A SOLD STICK OF PROPELLANT. THE CAP WITH THE VENTURIS ALSO HAD WHAT APPEARS TO BE AN AIMING SITE WELDED ONTO IT. THIS WAS A SMALL BARREL SHAPED OBJECT APPROXIMATELY 2 LONG. THE IED WAS REMOTELY MOVED TO A SAFE LOCATION WITH THE TALON ROBOT. FROM THERE THE EOD REMOVED BOTH END CAPS WITH A SLUG FROM THE .50 CAL DEARMER. THE CONTENTS WERE THEN REMOVED WITH THE ROBOT.